Subscribe
Browse Older Posts by Category

Posts Tagged ‘Bahama Shutter Hardware’

Bahama shutters

Bahama shutters

What exactly are Bahama Shutters?
Simply put, Bahama Shutters, also referred to as Bermuda Shutters, are shutters that are mounted at the top and propped out like an awning over a window. While mainly an exterior style of shutter they are some times used inside to give a more tropical feel to a room.  Bahama Shutter Hardware consist of hinges at the top and an arm to prop the shutter open.

Hinges for Bahama Shutters
There are 2 main types of hinges for Bahama Shutters, both of which are mounted at the top. There are continuous hinges (figure 1) running the width of the shutter and single knuckle hinges (figure 2) similar to a door hinge. The continuous hinges are stronger and more often used where the shutters will be fully functioning. The extruded continuous hinges we offer are the same ones supplied with Aluminum Hurricane Shutters. The single knuckle hinges can also be used on functioning exterior Bahama Shutters but are best situated where the shutters are propped open permanently like an awning.

Extruded Hinges for Bahamas Shutters

figure 1 - Extruded Hinges for Bahamas Shutters

Knuckle Hinges for Bahama Shutters

figure 2 - Knuckle Hinges for Bahama Shutters

Arms for Bahama Shutters
There are also 2 types of arms that are used to prop Bahama Shutters open. You have adjustable arms (figure 3) and stationary arms (figure 4). The adjustable arms are telescoping so that you can adjust the angle at which you prop open your Bahama Shutters. This is very helpful in getting your exterior shutters positioned just right so that you have a view to the outside while blocking the sun and afternoon showers. The stationary arms are used usually to prop open Bahama Shutters like an awning. These come in a few different lengths and are less expensive than the adjustable arms.

Keep in mind that depending on how wide your Bahama Shutters are you may need more than 2 arms per shutter.

Adjustable Arms on Bahama Shutters

figure 3 - Adjustable Arms on Bahama Shutters

Stationary Arms on Bahama Shutters

figure 4 - Stationary Arms on Bahama Shutters

What do I need if I am using them on Hurricane Shutters?
If you are using your Bahama Shutters for hurricane protection then I would strongly recommend our continuous hinges. They are not only much stronger than a knuckle hinges but are fastened more securely to your home to insure the best protection. As far as the arms go, since both are removed during a hurricane there is no real benefit one way or the other.

If you are not sure which type of hardware for Bahama shutters is best for you please ask us. Give us a call, send us an email or start an online chat. We are happy to help

Click here to order your Bahama Shutters Hardware.

Subscribe